This kit is still suitable even if your vehicle has a 2″ lift.
This is a brand new air bag load assist kit to suit the rear of the following vehicles:
DODGE RAM 1500 PICK UP – DS and DT
By selecting an “In-Cab Kit”, you will also be supplied with all the gear required to control the air in your bags from the inside of your vehicle and you can option for us to supply a compressor for you too if you do not already have one installed. Pair your large in-cab kit with one of our air tanks if you wish to increase the capacity of your onboard air system.
At AAA we own a RAM 1500 express and we love it. At least twice a week we are forklifting loads in and out of the back – picking up steel from laser cutters or taking bulk brackets to powder coaters. For us the RAM represents a man-sized work ute. But being a RAM owner we can speak openly and discuss the fact that RAM are pretty lousy at carrying a heavy load on their own. Come to think of it – it’s one of very few utes at all that have coils in the back which is great for comfort but the buck stops there. Suspenion in general is about compromises – enjoying a comfortable ride with soft coils means we can’t also expect to carry a heavy load well. Vehicles that can carry a heavier load tend to be less comfortable unloaded. This applies to every car. Just 300Kg will make the rear of a RAM squat down and that’s a bit disappointing for such a big ute. But that’s where our AAA Coil Assist kit saves the day.
The AAA kit replaces the rubber bump stop which is mounted directly under the chassis and over the axle. It sits beside the coil so the coil remains in the car – that’s peace of mind for those who may worry if something untoward were to happen to the bag they still at least have the coil. And being your new bump stop you want some cushion effect so when unloaded you want 10-15 psi in the bags to maintain that cushion without adding lift and stiffness. So we have kept that comfortable ride quality we enjoy.
Then as you load up just add more air to the bags. The rule of thumb being just add what ever it takes to keep it at standard height. If it helps we run about 40 psi when we tow a 22′ caravan and we go to about 60 psi when we have about 800Kg of steel in the back.
Unlike coil inserts which are only rated to 450Kg (and they wear out quickly) the AAA coil assist kit is rated to 2.5t so that’s a rating of 2.5t of additional weight over the rear axle – but the limiting factor is more your GVM and the vehicle’s ability to stop with such heavy loads. Just know the AAA bags are good for what ever you throw at them.
The AAA coil assit kit also comes with a 10 year new for old warranty. There are no rubbing surfaces or moving parts and the rubber in the bags is heavier than that in the sidewalls of your tyres and the bags aren’t on the road like your tyres are.
If interested here’s a link to our instructions showing what’s involved, download a digital copy here.
Des Steedman (verified owner) –
Great product but a slight change to the assembly bolts would make a huge difference to the ease of fitting the air bags to the vehicle.
Matthew C. (verified owner) –
Keith F. (verified owner) –
Great product very happy with it all
Brad Clark (verified owner) –
Great product works really well easy to install
Gavin H. (verified owner) –
This RAM1500 airbag kit installed very easily with some basic hand tools. So far its working a treat, leveling up the rear end while under tow. I just went with the basic kit and ran the airlines in the chassis towards the rear number plate to keep it simple.