LA01 (T) Airbag Kit

(1 customer review)

$600.00$1,645.00

Airbag kit includes two airbags, vehicle specific airbag mounts, required bolts, air fittings, air line tubing and inflation valves. Full instructions included.

This is a brand new air bag load assist kit to suit the rear of the following vehicles:

TOYOTA LANDCRUISER – 40, 45, 60, 75, 76, 78, 79 – ALL MODELS W/ LEAF SPRINGS
TOYOTA HILUX – All 2WD
NISSAN NAVARA – All 2WD

We have 3 height options for our LA01 kits:
Short, LA01 (S) – 200mm (for the low riders)
Mid, LA01 (M) – 235mm (most common)
Tall, LA01 (T) – 270mm (for the running lift kits)

By selecting an “In-Cab Kit”, you will also be supplied with all the gear required to control the air in your bags from the inside of your vehicle, and you can option for us to supply a compressor for you too if you do not already have one installed. Pair your large in-cab kit with one of our air tanks if you wish to increase the capacity of your onboard air system.

This is a very universal kit – the old holden 1 tonner and a V8 landcruiser ute with a big lift both run the same kit and just the length of brackets vary – Short, Medium and Tall. We have simplified your options with the correct length applied to each vehicle type.  But if you have any doubts about how tall your vehicle sits like what suspension lift you might have etc then simply jack up the tow bar so the rear sits where you expect it to ride then measure underside of chassis to top of axle. Because we make our own brackets, we can also do custom builds if you have special requirements.

The AAA leaf assist air bag kit replaces your bump stops and effectively becomes a bump stop conversion that can help you carry a load. When unloaded you want some air in the bags (10-15 psi) so you have some cushion or softness in the new bump stop effect. Then as you load up just add more air – what ever it takes to keep the vehicle level.  The AAA kit is rated at 2.5t so that’s the bags being capable of lifting 2.5t of additional weight over the rear axle. Your real limit is your GVM and what’s safe and sensible, but know the bags are up for what ever your load might be.

The rubber in the bags is heavier than the rubber in the sidewalls of your tyres so they last for ever seeing there is no rubbing or moving parts as such. AAA kits come with a 10 year new for old warranty on all bags, brackets, airlines and valves.

Fitment of our LA01 is dead easy – the top bracket replaces the bump stop and re-uses the old bump stop bolts. The rear axle sits above the spring so loosen the U bolts and slide the lower bracket under the U-bolts. No cutting drilling or welding and just a normal set of spanners is all you need. If interested here’s a link to our instructions and below is a short video clip showing what’s involved, download a digital copy here.

View our fitment video here:

Weight 8 kg
Dimensions 31 × 35 × 18 cm
In-cab Kit

No In-cab Kit, In-cab Kit (Small Compressor), In-cab Kit (Large Compressor), In-cab Kit (No Compressor)

Air Tank

None, 1.5L, 3.0L, 4.5L, 6.0L

1 review for LA01 (T) Airbag Kit

  1. David R. (verified owner)

    Great product, straight forward install

Add a review

Your email address will not be published.