DIY kit


Airbag kit includes two brand new AAA Suspension airbags, plain end plates and bolts.

These kits are for anyone wanting to build their own air assisted suspension set up. They can be used for:

  • Custom load assist kits in vehicles
  • Caravans and heavy duty trailers
  • Dump vehicles to drop car onto ground
  • 4 or 5 Link conversions from leaf spring
  • Car Trailers can drop to ground for easy ramp access
  • Lifting platforms
  • Press

These kits come with plain end plates made from untreated mild steel so that they are easy to weld. They come pre-drilled to fit the clamp rings on the bags and each plate comes with 6 bolts and washers.
The end plates are 6mm thick and 136mm wide.
One end plate comes with a 1/4″ bsp hole for the air inlet.

The  #2500 bag is tested to 50t and 1000psi each. They are conservatively rated to 2500 pounds each or 1.2t, and so 2 x bags combined are rated to 2.4t

Specifications :

  • Fully Compressed – 65mm with 6mm ends fitted
  • Max Diameter- 155mm (widest when fully compressed)
  • Max height – 210mm
  • Max working pressure 0-160psi
  • Test pressure – 480psi
  • Burst pressure – 1000psi

NOTE: This kit is available in multiple  bag sizes: 2402, 2403, 2501, 2502, 2503, 2602, 2603, 3502

Weight 3 kg
Dimensions 18 × 18 × 31 cm
Airbag size

2402, 2403, 2501, 2502, 2503, 2602, 2603, 3500


There are no reviews yet.

Be the first to review “DIY kit”

Your email address will not be published.